This industrial O-ring, crafted from robust Buna-N material with a Titanium Grade 5 casing, offers exceptional sealing performance in extreme environments. Engineered for reliability and durability.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.934" |
| Outside Diameter | 5.730" |
| Cross Section | 0.099" |
Precision-manufactured to tight tolerances, this O-ring boasts an Inside Diameter of 3.934 inches, an Outside Diameter of 5.730 inches, and a Cross Section of 0.099 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and hydraulic fluids, while the Titanium Grade 5 casing imparts superior strength, corrosion resistance, and thermal stability, making it ideal for high-pressure, high-temperature, and chemically aggressive environments where standard elastomers would fail. Its specific material composition and dimensions ensure a secure, leak-proof seal in critical industrial operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and use appropriate tools to guide the O-ring into the groove without stretching or pinching. |
| Incorrect lubricant selection, causing material degradation. | Always use a lubricant specifically recommended for Buna-N and the operating environment. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Chemical processing equipment, High-pressure fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||