This industrial O-ring, crafted from robust Buna-N, offers exceptional sealing performance. Its advanced Titanium Grade 5 construction ensures superior durability and chemical resistance in critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.674" |
| Outside Diameter | 4.843" |
| Cross Section | 0.205" |
A proven choice for industrial professionals, this Buna-N O-ring features an Inside Diameter of 9.674 inches, an Outside Diameter of 4.843 inches, and a precise Cross Section of 0.205 inches. While Buna-N (Nitrile) is a common elastomer known for its excellent resistance to oils, fuels, and hydraulic fluids, its application in conjunction with a Titanium Grade 5 material is highly specialized. Titanium Grade 5 (Ti-6Al-4V) offers exceptional strength-to-weight ratio, corrosion resistance, and biocompatibility. This combination is typically employed in extreme environments where both chemical inertness and mechanical integrity are paramount, such as aerospace, advanced medical devices, or highly corrosive chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Carefully inspect the O-ring for any defects or damage. 3. Gently install the O-ring into the groove, avoiding stretching or twisting, to achieve a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Use a suitable lubricant and install the O-ring without excessive tension to prevent premature failure and ensure proper sealing. |
| Using the wrong O-ring size or material for the application. | Always verify the required O-ring dimensions and material compatibility with the fluid and operating conditions. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace Hydraulic Systems, High-Corrosion Chemical Processing, Advanced Medical Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||