This industrial O-ring, constructed from robust Buna-N, offers exceptional sealing capabilities. Its Titanium Grade 5 composition ensures superior corrosion resistance and mechanical strength for critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.248" |
| Outside Diameter | 0.605" |
| Cross Section | 0.217" |
Manufactured under strict quality controls, this Buna-N O-ring features a precise Inside Diameter of 3.248 inches, an Outside Diameter of 0.605 inches, and a Cross Section of 0.217 inches. The Buna-N material provides excellent resistance to oils, fuels, and hydraulic fluids, while the Titanium Grade 5 provides exceptional tensile strength, hardness, and resistance to a wide range of corrosive environments, making it suitable for aerospace, chemical processing, and high-pressure systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully position the O-ring within the groove, avoiding excessive stretching or twisting. 3. Apply a compatible lubricant if necessary to facilitate installation and proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners that compress the O-ring beyond its elastic limit. | Tighten fasteners to the manufacturer's specified torque to prevent premature failure and extrusion. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult the O-ring material compatibility chart and use only approved lubricants and cleaning agents. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic systems requiring oil and fuel resistance, Chemical processing equipment with moderate temperature and pressure, Aerospace components demanding high strength and corrosion resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||