Engineered for demanding industrial environments, this Buna-N O-ring features exceptional chemical resistance and a robust Titanium Grade 5 construction for superior durability and performance in critical sealing applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.586" |
| Outside Diameter | 3.153" |
| Cross Section | 0.166" |
A proven choice for industrial professionals, this Buna-N O-ring (2.586" ID, 3.153" OD, 0.166" CS) is meticulously crafted from Titanium Grade 5. This advanced alloy provides unparalleled corrosion resistance against a wide spectrum of chemicals, solvents, and hydraulic fluids, making it suitable for operation across a broad temperature range. Its high tensile strength and low coefficient of thermal expansion ensure reliable sealing integrity under extreme pressure and fluctuating environmental conditions, minimizing leaks and extending service life in rigorous industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free from debris. 2. Apply a thin layer of compatible lubricant to the O-ring and groove. 3. Carefully install the O-ring, avoiding stretching or twisting, ensuring it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply appropriate lubrication and use proper tooling to gently seat the O-ring. |
| Installing in a contaminated groove, compromising seal integrity. | Thoroughly clean the groove and inspect for any foreign particles before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic systems, Chemical processing equipment, High-pressure pneumatic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||