Engineered for superior sealing in extreme conditions, this Buna-N O-ring features a robust Titanium Grade 5 construction. Its precise dimensions ensure reliable performance in demanding industrial settings.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 0.717" |
| Outside Diameter | 3.758" |
| Cross Section | 0.186" |
Designed for demanding industrial environments, this O-ring boasts exceptional chemical resistance and a broad operating temperature range inherent to Buna-N, further enhanced by the superior strength, corrosion resistance, and lightweight properties of Titanium Grade 5. With an Inside Diameter of 0.717", an Outside Diameter of 3.758", and a Cross Section of 0.186", it offers a precise fit for critical sealing applications. Ideal for hydraulic systems, chemical processing, and high-pressure fluid management where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the smaller component or into the larger groove, avoiding any sharp edges or excessive stretching. 3. Seat the O-ring fully into its groove, ensuring it is not twisted or pinched during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| O-ring twisting during installation | Ensure the O-ring is correctly oriented and not rotated as it's installed. Use a lubricant to reduce friction and facilitate smooth seating. |
| O-ring being pinched by sharp edges | Inspect mating surfaces and grooves for any burrs or sharp edges that could damage the O-ring. Smooth or chamfer these edges before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Automotive and Aerospace Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||