Engineered for demanding industrial sealing, this Buna-N O-ring features a robust Titanium Grade 5 housing. It offers exceptional chemical resistance and operational stability across a wide temperature range, ensuring reliable performance in critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.162" |
| Outside Diameter | 8.930" |
| Cross Section | 0.074" |
Built to exacting engineering tolerances, this industrial O-ring boasts an Inside Diameter of 1.162 inches, an Outside Diameter of 8.930 inches, and a Cross Section of 0.074 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and many hydraulic fluids, while the Titanium Grade 5 housing enhances structural integrity, corrosion resistance, and performance in high-pressure or abrasive environments. This combination makes it suitable for aerospace, chemical processing, and oil & gas applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and mating surfaces are clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Verify proper seating and compression before assembling the mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, causing premature O-ring extrusion or damage. | Follow specified torque values for fasteners to achieve optimal compression without overstressing the O-ring. |
| Using incompatible cleaning agents that degrade the Buna-N elastomer. | Refer to chemical compatibility charts and use only approved cleaning solutions for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic systems in extreme environments, Aerospace fluid connectors, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||