Engineered for extreme environments, this industrial O-ring features a robust Buna-N sealing element bonded to a superior Titanium Grade 5 substrate, offering exceptional durability and corrosion resistance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.533" |
| Outside Diameter | 9.097" |
| Cross Section | 0.254" |
Manufactured under strict quality controls, this industrial O-ring boasts precise dimensions: an Inside Diameter of 8.533 inches, an Outside Diameter of 9.097 inches, and a Cross Section of 0.254 inches. The Buna-N compound provides excellent resistance to oils, fuels, and many hydraulic fluids, while the Titanium Grade 5 substrate ensures unparalleled strength, light weight, and superior corrosion resistance in aggressive chemical and high-temperature environments. This combination makes it ideal for aerospace, chemical processing, and high-performance fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Visually inspect the groove and mating surfaces for cleanliness and damage. 2. Carefully install the O-ring into its designated groove, avoiding any pinching or stretching. 3. Ensure the O-ring is properly seated and compressed without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring deformation or damage. | Apply gentle, consistent pressure, utilizing appropriate tools if necessary, to seat the O-ring without stretching or twisting. |
| Installing the O-ring into a dirty or damaged groove, compromising the seal integrity. | Thoroughly clean the groove and inspect for any nicks, burrs, or debris before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Chemical processing equipment, High-pressure fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||