Engineered for extreme sealing challenges, this industrial O-ring leverages the robust chemical resistance of Buna-N with the unparalleled strength and corrosion resistance of Titanium Grade 5. Designed for critical, high-demand environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.647" |
| Outside Diameter | 6.382" |
| Cross Section | 0.209" |
Purpose-built for heavy-duty applications, this industrial O-ring features a precise Inside Diameter of 9.647 inches, an Outside Diameter of 6.382 inches, and a Cross Section of 0.209 inches. The robust Buna-N elastomer provides excellent resistance to oils, fuels, and hydraulic fluids, while the Titanium Grade 5 housing ensures exceptional mechanical strength, superior corrosion resistance in aggressive chemical and high-temperature environments, and biocompatibility. Ideal for aerospace, chemical processing, and oil & gas exploration where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, dry, and free from debris or damage. 2. Carefully inspect the O-ring for any defects before installation. 3. Gently install the O-ring into the groove, avoiding the use of sharp tools that could nick or cut the seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation. | Apply gentle, even pressure. Lubricate the O-ring and groove with a compatible lubricant if necessary to ease installation and prevent damage. |
| Installing a damaged O-ring. | Thoroughly inspect the O-ring for cuts, nicks, or abrasions before attempting installation. Replace any damaged seals immediately. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, Chemical processing equipment, Oil and gas downhole tools, High-pressure hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||