Engineered for demanding industrial applications, this Buna-N O-ring features a robust Titanium Grade 5 construction. It offers exceptional sealing integrity in harsh chemical and temperature conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.031" |
| Outside Diameter | 3.406" |
| Cross Section | 0.079" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter of 1.031 inches, an Outside Diameter of 3.406 inches, and a precise Cross Section of 0.079 inches. The Buna-N elastomer provides excellent resistance to petroleum-based oils, fuels, and many hydraulic fluids, while the Titanium Grade 5 housing ensures superior corrosion resistance, high tensile strength, and performance at elevated temperatures. This combination makes it ideal for critical sealing in aerospace, automotive, and chemical processing equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Visually inspect the O-ring and mating groove for debris or damage. 2. Apply a thin layer of compatible lubricant to the O-ring and groove. 3. Carefully install the O-ring into its designated groove, ensuring it is seated without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring with care, ensuring it is properly lubricated and placed squarely in the groove to prevent damage and ensure a proper seal. |
| Using incompatible lubricants or cleaning agents. | Always refer to material compatibility charts to ensure lubricants and cleaning agents are suitable for Buna-N and Titanium Grade 5 to prevent degradation. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace Hydraulic Systems, Automotive Fuel Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||