This industrial O-ring, constructed from resilient Buna-N and housed within a robust Titanium Grade 5 casing, offers exceptional sealing in demanding environments. Its precise dimensions ensure a secure and reliable fit for critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.899" |
| Outside Diameter | 0.450" |
| Cross Section | 0.183" |
Engineered for reliability and performance, this industrial O-ring features a 2.899" inside diameter, a 0.450" outside diameter, and a 0.183" cross-section. The Buna-N material provides excellent resistance to oils, fuels, and certain solvents, while the Titanium Grade 5 casing offers superior corrosion resistance and mechanical strength, making it suitable for aerospace, chemical processing, and high-pressure hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly machined. 2. Lubricate the O-ring lightly with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, until it is seated uniformly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or tears in the O-ring. | Apply light lubrication and gentle pressure. Use appropriate installation tools if necessary. |
| Installing on a dirty or damaged groove, compromising the seal integrity. | Thoroughly inspect and clean the groove before installation. Ensure it meets dimensional specifications. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Chemical processing equipment, High-pressure fluid power, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||