This industrial-grade Silicone O-Ring, featuring a brass material composition, is engineered for exceptional sealing performance in high-pressure and extreme temperature environments. Its robust construction guarantees longevity and reliability.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.828" |
| Outside Diameter | 5.246" |
| Cross Section | 0.151" |
Purpose-built for heavy-duty applications, this Silicone O-Ring offers a nominal Inside Diameter of 9.828 inches, an Outside Diameter of 5.246 inches, and a Cross Section of 0.151 inches. The inherent properties of silicone, combined with the material's excellent resistance to heat, ozone, and weathering, make it ideal for demanding industrial sectors. The brass material provides enhanced structural integrity and corrosion resistance for critical sealing points.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or residual lubricants. 2. Carefully position the O-ring within its designated groove, ensuring no twisting or stretching. 3. Apply a thin, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring deformation or tearing. | Apply gentle pressure and ensure the O-ring is seated correctly in its groove without stretching. |
| Incorrect O-ring size selection for the application, resulting in leaks or premature failure. | Always verify the O-ring dimensions against the groove and shaft specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature fluid handling systems, Chemical processing equipment, Automotive and aerospace sealing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||