This industrial silicone O-ring, featuring a brass material composition, ensures exceptional sealing performance. Its precise dimensions provide a robust solution for demanding applications requiring high integrity and durability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.490" |
| Outside Diameter | 6.062" |
| Cross Section | 0.225" |
A high-performance industrial component, this silicone O-ring is engineered for critical sealing applications. With an inside diameter of 6.490 inches, an outside diameter of 6.062 inches, and a cross-section of 0.225 inches, it offers a precise fit. The silicone material provides excellent flexibility, temperature resistance, and chemical inertness, while the integrated brass component enhances its structural integrity and potentially its conductivity or galvanic compatibility in specific systems. This combination makes it ideal for environments requiring reliable fluid or gas containment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring onto the designated groove or shaft, avoiding stretching or twisting. 3. Apply light, even pressure to seat the O-ring securely within its housing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation, leading to reduced lifespan and sealing failure. | Install the O-ring without excessive tension, allowing it to conform naturally to the groove. |
| Using incorrect lubricants or contaminants that can degrade the silicone material. | Consult the material compatibility chart and use only approved lubricants or cleaning agents. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature fluid systems, Chemical processing equipment, Electrical enclosures requiring environmental sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||