This high-performance silicone O-ring, featuring a brass composition for enhanced durability, provides superior sealing in challenging industrial settings. Its robust construction ensures reliable performance across a wide temperature range.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 5.596" |
| Outside Diameter | 10.768" |
| Cross Section | 0.123" |
Designed for demanding industrial environments, this silicone O-ring exhibits exceptional resilience to extreme temperatures, ozone, UV radiation, and a broad spectrum of chemicals. The precisely machined brass construction contributes to its structural integrity and compatibility with specific media. With an inside diameter of 5.596 inches, an outside diameter of 10.768 inches, and a cross-section of 0.123 inches, this O-ring is engineered for precise fitment in critical sealing applications, preventing leaks and ensuring operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary for easier assembly and to prevent premature wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, causing compression set and premature failure. | Tighten fittings to the manufacturer's recommended torque specifications to avoid excessive compression. |
| Using incompatible lubricants that degrade the silicone material. | Consult the material compatibility chart and use only lubricants specifically approved for silicone elastomers. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature fluid systems, Chemical processing equipment, Automotive and aerospace sealing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||