This industrial silicone O-ring features a brass mounting for enhanced rigidity and durability. Engineered for superior sealing in diverse industrial applications, it offers excellent resistance to temperature extremes and chemical exposure.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.169" |
| Outside Diameter | 8.976" |
| Cross Section | 0.141" |
Specified by design engineers worldwide, this industrial O-ring is constructed with a high-performance silicone elastomer embedded within a precisely machined brass housing. The inner diameter is 1.169 inches, the outer diameter measures 8.976 inches, and the cross-section is 0.141 inches. This combination provides robust sealing capabilities, exceptional resilience, and dimensional stability across a wide operating temperature range. The brass integration enhances mechanical strength and facilitates secure mounting in demanding fluid power and mechanical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free from debris. 2. Carefully position the O-ring within the groove, avoiding excessive stretching or twisting. 3. Apply a thin film of compatible lubricant to the O-ring and the mating surface if recommended for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to premature compression set or extrusion. | Install with appropriate torque specifications and avoid excessive force. Ensure the O-ring is seated correctly without distortion. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Consult material compatibility charts and use only lubricants and cleaning agents approved for silicone elastomers. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, Automotive sealing components, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||