This industrial silicone O-ring, constructed with an Aluminum 6061 core, offers robust sealing in challenging environments. Its precise dimensions ensure reliable performance in critical fluid and gas containment systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.478" |
| Outside Diameter | 2.595" |
| Cross Section | 0.174" |
Manufactured under strict quality controls, this industrial O-ring features an Inside Diameter of 9.478 inches, an Outside Diameter of 2.595 inches, and a Cross Section of 0.174 inches. The core material, Aluminum 6061, provides excellent structural integrity and corrosion resistance, while the silicone elastomer offers superior flexibility, high-temperature resistance, and chemical inertness. This combination makes it suitable for applications requiring dependable sealing under demanding pressure and temperature variations, including aerospace, automotive, and chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sealing groove and mating surfaces for cleanliness and damage. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or excessive force. 3. Ensure the O-ring is properly seated and free of twists or kinks within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Gently stretch the O-ring, using lubricant if necessary, and ensure it is seated correctly without twisting. |
| Installing on a dirty or damaged groove, compromising the seal. | Thoroughly clean and inspect the sealing groove and mating surfaces before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Fluid and Gas Containment, High-Temperature Sealing, Aerospace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||