This industrial-grade Silicone O-Ring, fabricated from Aluminum 6061, offers exceptional sealing performance. Its precise dimensions ensure reliable operation in demanding environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.360" |
| Outside Diameter | 5.110" |
| Cross Section | 0.115" |
Precision-manufactured to tight tolerances, this Silicone O-Ring boasts an Inside Diameter of 5.360" and an Outside Diameter of 5.110", with a 0.115" cross-section. The Aluminum 6061 material provides excellent corrosion resistance and structural integrity, making it suitable for applications requiring both robust sealing and lightweight construction. Its silicone composition offers a broad temperature range and good chemical resistance, ideal for use in automotive, aerospace, and industrial machinery where reliable fluid or gas containment is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding overstretching. 3. Position the O-ring squarely within the groove, ensuring no twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to permanent deformation. | Install with gentle, even pressure, ensuring the O-ring seats properly without excessive force. |
| Using a dry O-ring in a dynamic application, causing friction and wear. | Apply a compatible lubricant to the O-ring and mating surfaces before installation in dynamic seals. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Automotive fluid systems, Aerospace hydraulic components, Industrial pump seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||