This high-performance industrial O-ring, constructed from premium silicone, offers exceptional resilience and temperature resistance. Designed for critical sealing applications, it ensures reliable performance across a wide operational spectrum.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.163" |
| Outside Diameter | 2.421" |
| Cross Section | 0.171" |
A high-performance industrial component, this Silicone O-ring boasts an inside diameter of 9.163 inches, an outside diameter of 2.421 inches, and a precise 0.171-inch cross-section. The material, 316 Stainless Steel, provides excellent corrosion resistance and mechanical strength, making it ideal for applications involving aggressive chemicals, high temperatures, and extreme pressures. Its silicone composition offers superior flexibility and sealing capabilities compared to conventional elastomers, ensuring a long service life and dependable barrier against leaks in critical fluid and gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free from debris, and properly dimensioned. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant to prevent tearing and facilitate installation. 3. Gently install the O-ring into the groove, avoiding stretching or twisting, ensuring it sits flush and uniformly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, which can lead to O-ring extrusion. | Tighten the gland to the manufacturer's specified torque or compression limits. |
| Using incompatible lubricants, which can degrade the silicone material. | Always use lubricants recommended for silicone O-rings and the specific application environment. |
| Installing the O-ring with sharp tools or excessive force, causing nicks or cuts. | Use plastic or rubber installation tools and apply gentle, consistent pressure. |
A: This Industrial O-Ring, Silicone is manufactured from 316 Stainless Steel.
A: Chemical processing equipment, High-temperature fluid handling systems, Pharmaceutical manufacturing seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||