This high-performance industrial O-ring is constructed from durable Silicone, featuring precise dimensions of 9.039" ID, 8.596" OD, and 0.226" CS. Engineered for robust sealing in challenging applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.039" |
| Outside Diameter | 8.596" |
| Cross Section | 0.226" |
Engineered for reliability and performance, this industrial O-ring is precision-manufactured with an Inside Diameter of 9.039 inches, an Outside Diameter of 8.596 inches, and a Cross Section of 0.226 inches. The material composition of Aluminum 6061 ensures excellent corrosion resistance and mechanical strength, making it suitable for a wide range of industrial sealing applications. This specific combination of material and dimensions provides a secure, long-lasting seal against leakage in systems operating under moderate pressure and temperature variations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free from debris, and has a smooth finish. 2. Carefully inspect the O-ring for any damage or defects before installation. 3. Gently stretch and place the O-ring into the designated groove, ensuring it sits flush without twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the sealing assembly, which can deform or damage the O-ring. | Tighten fasteners to the manufacturer's recommended torque specifications to avoid excessive compression. |
| Using the wrong O-ring size for the groove, leading to leaks or premature failure. | Always verify O-ring dimensions against the groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Fluid power systems, Automotive components, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||