This industrial-grade Silicone O-Ring, designed with a nominal 8.729" ID, 3.059" OD, and 0.246" cross-section, offers exceptional sealing performance. Its silicone composition ensures flexibility and resilience across a wide temperature range.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 8.729" |
| Outside Diameter | 3.059" |
| Cross Section | 0.246" |
Trusted by engineers across multiple sectors, this Silicone O-Ring is manufactured to precise tolerances, featuring an Inside Diameter of 8.729 inches, an Outside Diameter of 3.059 inches, and a Cross Section of 0.246 inches. The inherent properties of silicone rubber provide excellent resistance to extreme temperatures, ozone, and UV radiation, making it ideal for applications requiring long-term reliability and flexibility in harsh conditions. Its non-toxic nature also supports its use in food-grade and medical applications where purity is paramount. This material choice ensures consistent sealing integrity even under significant pressure variations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating groove dimensions are within specified tolerances for the 0.246" cross-section. 2. Carefully clean both the O-ring and the groove to remove any debris or contaminants. 3. Gently install the O-ring into the groove, avoiding stretching or twisting, to maintain its sealing integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or excessive stretching during installation. | Install the O-ring without undue tension to prevent premature failure and ensure a proper seal. |
| Using incompatible cleaning agents that can degrade silicone. | Utilize only mild soaps or approved silicone-compatible solvents for cleaning. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Aerospace fluid systems, Medical equipment seals, Food and beverage processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||