This industrial-grade silicone O-ring provides reliable sealing in a wide range of temperatures. Its durable construction ensures longevity and exceptional performance in critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.313" |
| Outside Diameter | 5.337" |
| Cross Section | 0.150" |
Manufactured under strict quality controls, this silicone O-ring boasts an inside diameter of 8.313 inches, an outside diameter of 5.337 inches, and a cross-section of 0.150 inches. The inherent properties of silicone, including its excellent flexibility, resistance to extreme temperatures (typically -60°C to 200°C), and good dielectric strength, make it ideal for applications requiring consistent sealing in challenging environments. This material offers good resistance to weathering, ozone, and UV radiation, further enhancing its suitability for outdoor or exposed industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free of debris. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Apply a light lubricant compatible with silicone if necessary to facilitate installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during gland assembly, leading to excessive compression and premature failure. | Ensure proper gland design and utilize the recommended compression range for the specific application to avoid over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Always verify the compatibility of lubricants and cleaning agents with silicone rubber to maintain sealing integrity and material lifespan. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Aerospace and Automotive Sealing, Food and Beverage Processing, Medical Equipment Seals, High and Low-Temperature Applications, Electrical Insulation and Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||