Engineered for superior sealing performance, this industrial Silicone O-Ring offers exceptional resilience. Its precisely controlled dimensions ensure a reliable seal in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.769" |
| Outside Diameter | 1.245" |
| Cross Section | 0.173" |
Manufactured under strict quality controls, this Nylon-reinforced Silicone O-Ring (Nylon as a casing, silicone as the sealing element) features an Inside Diameter of 2.769 inches, an Outside Diameter of 1.245 inches, and a Cross Section of 0.173 inches. The silicone elastomer provides excellent flexibility, high-temperature resistance (up to 200°C), and good resistance to weathering and ozone. The Nylon casing enhances its tensile strength and abrasion resistance, making it suitable for dynamic sealing applications where durability is paramount. This combination ensures a robust and long-lasting seal in various industrial fluid power and mechanical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Carefully stretch or compress the O-ring to fit into the designated groove, ensuring it is not twisted. 3. Verify the O-ring is properly seated and uniformly compressed within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong O-ring size for the groove, leading to extrusion or leakage. | Always confirm the O-ring's inside and outside diameters, and cross-section, match the groove specifications precisely. |
| Overtightening fasteners, which can crush the O-ring and compromise its sealing ability. | Follow torque specifications for fasteners. Ensure even pressure distribution around the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic and pneumatic cylinders, Valve stems and pump housings, Automotive engine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||