This industrial Silicone O-ring offers superior sealing performance across a wide temperature range. Precisely manufactured to exacting tolerances for reliable operation in critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.941" |
| Outside Diameter | 7.941" |
| Cross Section | 0.136" |
Manufactured under strict quality controls, this Silicone O-ring boasts an inside diameter of 6.941 inches, an outside diameter of 7.941 inches, and a cross-section of 0.136 inches. The inherent properties of silicone rubber provide excellent flexibility, resilience, and resistance to extreme temperatures (typically -55°C to +230°C) and UV exposure. This material also exhibits good resistance to ozone and weathering, making it suitable for both static and dynamic sealing applications in food processing, medical equipment, and general industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply a thin, compatible lubricant to the O-ring and groove if recommended for the application. 3. Carefully install the O-ring into its designated groove, ensuring it is seated evenly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an O-ring that is too small or too large for the groove. | Verify O-ring dimensions (ID, OD, CS) against groove specifications to ensure proper compression and sealing. |
| Twisting the O-ring during installation. | Gently roll or place the O-ring into the groove to prevent twisting, which can lead to premature failure and leakage. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Instrumentation, General Industrial Machinery and Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||