This industrial Silicone O-ring provides exceptional sealing performance in challenging environments. Its robust material and precise dimensions ensure reliable, leak-free operation across a wide temperature range.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 5.296" |
| Outside Diameter | 7.005" |
| Cross Section | 0.191" |
Engineered for reliability and performance, this industrial O-ring boasts an Inside Diameter of 5.296", an Outside Diameter of 7.005", and a Cross Section of 0.191". Constructed from premium-grade silicone, it offers superior flexibility, excellent resistance to extreme temperatures (typically -60°C to +230°C), UV radiation, and ozone. Its inherent biocompatibility makes it suitable for food-grade and medical applications where purity and safety are paramount. The material's resilience ensures a tight, long-lasting seal under pressure, preventing fluid or gas leakage in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the groove and mating surfaces thoroughly to remove any debris or residue. 2. Lubricate the O-ring lightly with a compatible silicone grease if necessary to facilitate installation and prevent damage. 3. Carefully install the O-ring into the designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland assembly. | Ensure the gland is tightened to the manufacturer's recommended torque specifications to avoid excessive compression and premature failure of the O-ring. |
| Using incompatible lubricants or cleaning agents. | Always use lubricants and cleaning agents specifically recommended for silicone elastomers to prevent material degradation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Aerospace and Automotive Sealing, Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||