This industrial-grade Silicone O-Ring, meticulously crafted from Aluminum 6061, offers superior sealing performance in challenging environments. Designed for precision and durability.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.961" |
| Outside Diameter | 5.952" |
| Cross Section | 0.100" |
Manufactured under strict quality controls, this Silicone O-Ring features an Inside Diameter of 4.961 inches, an Outside Diameter of 5.952 inches, and a Cross Section of 0.100 inches. The Aluminum 6061 material provides excellent corrosion resistance, good strength-to-weight ratio, and conductivity, making it suitable for aerospace, automotive, and general industrial applications requiring reliable sealing against fluids and gases. Its robust construction ensures long-term performance under moderate pressure and temperature ranges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring within its groove. 3. Apply a light lubricant compatible with silicone and the sealing environment if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect O-ring size selection leading to leakage or over-compression. | Always verify O-ring dimensions (ID, OD, cross-section) against the groove dimensions and application requirements. |
| Installing the O-ring with sharp tools that can nick or cut the sealing surface. | Use rounded or plastic installation tools to avoid damaging the O-ring during assembly. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Fluid power systems, Automotive sealing components, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||