This industrial Silicone O-ring provides superior sealing in harsh environments. Engineered for precision, its robust material ensures long-term reliability and exceptional performance across a wide temperature range.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.029" |
| Outside Diameter | 10.239" |
| Cross Section | 0.247" |
A high-performance industrial component, this Silicone O-ring is manufactured to exacting tolerances for critical sealing duties. With an inside diameter of 9.029 inches, an outside diameter of 10.239 inches, and a robust 0.247-inch cross-section, it offers reliable containment in demanding fluid and gas systems. The inherent properties of silicone rubber, including excellent flexibility, resistance to extreme temperatures (-55°C to +230°C), and good dielectric strength, make it ideal for applications in aerospace, medical devices, and food processing equipment where purity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure and ensure the O-ring seats properly without deformation. |
| Incorrect O-ring size selection for the groove dimensions. | Always verify O-ring dimensions against the groove specifications and application requirements. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing, Chemical processing equipment, Medical device components, Aerospace fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||