This robust industrial O-ring, crafted from premium silicone, ensures reliable sealing in extreme conditions. Its precise dimensions and material resilience offer superior performance in critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.058" |
| Outside Diameter | 5.503" |
| Cross Section | 0.166" |
Purpose-built for heavy-duty applications, this silicone O-ring features an inside diameter of 6.058 inches, an outside diameter of 5.503 inches, and a cross-section of 0.166 inches. The inherent flexibility and wide operating temperature range of silicone (-60°C to 230°C) make it ideal for sealing against various fluids and gases in environments subject to thermal cycling, UV exposure, and chemical attack. Its excellent dielectric properties also contribute to its suitability in electrical and electronic assemblies where robust environmental protection is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sealing groove and mating surfaces thoroughly to remove any debris or old sealant. 2. Lightly lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring, ensuring it is seated evenly and without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the seal | Apply torque only to the manufacturer's specified limits to prevent O-ring damage and loss of sealing force. |
| Using incompatible lubricants | Always consult chemical compatibility charts to select a lubricant that will not degrade the silicone material. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature industrial machinery, Aerospace and automotive sealing, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||