High-performance industrial O-ring crafted from premium silicone, offering exceptional flexibility and resistance to extreme temperatures and chemicals. Designed for robust sealing in critical applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.948" |
| Outside Diameter | 3.473" |
| Cross Section | 0.249" |
Engineered for reliability and performance, this industrial O-ring boasts an Inside Diameter of 5.948 inches and an Outside Diameter of 3.473 inches, with a precise Cross Section of 0.249 inches. Manufactured from high-grade polycarbonate (note: material specified as Polycarbonate, but description implies Silicone. Assuming Silicone for properties below as per product title. If Polycarbonate is strictly intended, properties would differ significantly), this material provides excellent thermal stability, flexibility across a wide temperature range (-60°C to +230°C), and good resistance to ozone, UV, and weathering. Its inherent non-stick surface also aids in ease of assembly and disassembly. Ideal for static and dynamic sealing applications in food processing, medical devices, and aerospace.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or damage. 2. Carefully inspect the O-ring for any defects before installation. 3. Gently stretch or compress the O-ring as needed to fit within the groove, avoiding excessive force or sharp tools that could cause damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners that compress the O-ring beyond its designed stroke. | Utilize torque-limiting tools to ensure fasteners are tightened to the manufacturer's specified torque, preventing over-compression and premature failure. |
| Using incompatible cleaning agents that degrade the silicone material. | Only use cleaning agents specifically recommended for silicone rubber, such as mild soap and water or isopropyl alcohol. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical and Pharmaceutical Devices, Aerospace and Automotive Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||