This industrial Silicone O-Ring, crafted from robust Aluminum 6061, provides superior sealing for critical applications. Its precise dimensions ensure a reliable, leak-free seal in challenging environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.751" |
| Outside Diameter | 7.861" |
| Cross Section | 0.142" |
Manufactured under strict quality controls, this industrial O-ring features an Inside Diameter of 1.751 inches, an Outside Diameter of 7.861 inches, and a Cross Section of 0.142 inches. The Aluminum 6061 material offers excellent corrosion resistance and structural integrity, making it suitable for moderate temperature ranges and environments where a rigid, yet resilient, sealing element is required. This combination ensures reliable performance in applications demanding precise dimensional accuracy and consistent sealing force.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from debris. 2. Carefully place the O-ring into the designated groove, avoiding excessive stretching or twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently ease the O-ring into the groove, using minimal force and avoiding distortion of its shape. |
| Installing into a contaminated or damaged groove. | Thoroughly inspect and clean the groove before installation to ensure a proper seal. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Automotive fluid systems, Hydraulic and pneumatic cylinders, Industrial pump seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||