This industrial-grade Silicone O-Ring, constructed with a robust 304 Stainless Steel housing, provides superior sealing in demanding environments. Engineered for resilience, it ensures consistent performance and longevity.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.265" |
| Outside Diameter | 8.883" |
| Cross Section | 0.157" |
Engineered for reliability and performance, this industrial O-ring features a precise Inside Diameter of 4.265 inches, an Outside Diameter of 8.883 inches, and a 0.157-inch cross-section. The 304 stainless steel construction offers exceptional corrosion resistance and mechanical strength, making it suitable for high-temperature and chemically aggressive applications. Its silicone elastomer provides excellent flexibility, temperature range, and sealing capabilities, ensuring a tight seal against leaks in critical fluid and gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully insert the O-ring into its designated groove, avoiding any twisting or stretching. 3. Apply a thin layer of compatible lubricant if required for assembly ease, ensuring it does not compromise sealing integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, leading to O-ring extrusion or damage. | Follow specified torque values for retaining hardware. Hand-tighten where appropriate and rely on the O-ring's compression for sealing. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Consult the material compatibility chart for the silicone elastomer and the intended media. Use only approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Food and beverage machinery, Pharmaceutical manufacturing, Automotive sealing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||