This industrial O-ring, crafted from high-grade silicone, provides exceptional sealing performance. Its robust carbon steel construction ensures durability and reliable operation in demanding environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.309" |
| Outside Diameter | 0.445" |
| Cross Section | 0.163" |
A high-performance industrial component, this silicone O-ring is engineered for critical sealing applications. Featuring an inside diameter of 5.309 inches, an outside diameter of 0.445 inches, and a cross-section of 0.163 inches, it is constructed from durable carbon steel. The silicone material offers excellent resistance to extreme temperatures, ozone, and weathering, making it ideal for use in automotive, aerospace, and chemical processing industries where reliable, long-lasting seals are paramount. Its precise dimensions ensure a tight fit and effective containment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or lubricant. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding excessive force. 3. Ensure the O-ring is properly seated and free from twists or kinks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Gently stretch the O-ring and use appropriate tools if necessary to avoid damaging the sealing surface. |
| Installing on dirty or contaminated surfaces, compromising the seal integrity. | Always ensure all mating surfaces are meticulously cleaned before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Automotive seals, Aerospace components, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||