This industrial O-ring, crafted from durable silicone and featuring a brass fitting, offers superior sealing performance. Precisely manufactured to your specifications for reliable and long-lasting application.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.287" |
| Outside Diameter | 8.789" |
| Cross Section | 0.085" |
Built to exacting engineering tolerances, this silicone O-ring boasts an Inside Diameter of 7.287 inches, an Outside Diameter of 8.789 inches, and a Cross Section of 0.085 inches. The high-grade silicone material provides excellent flexibility, resistance to extreme temperatures (-60°F to 450°F), and a wide range of chemical compatibility, making it ideal for applications in food and beverage processing, medical equipment, and high-temperature fluid handling systems where a brass connection is required for material integrity or electrical conductivity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Lightly lubricate the O-ring and the mating groove with a compatible lubricant. 3. Carefully seat the O-ring into its designated groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the fitting, which can crush the O-ring and compromise the seal. | Tighten fittings to the manufacturer's recommended torque specifications. |
| Using incompatible lubricants or cleaning agents, which can degrade the silicone material. | Always consult the O-ring's material compatibility chart and use only approved lubricants and cleaners. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Food and Beverage Processing Equipment, Medical and Pharmaceutical Devices, High-Temperature Fluid Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||