This industrial-grade Silicone O-ring, manufactured with Aluminum 6061, offers superior sealing capabilities. Engineered for resilience, it ensures effective containment in a wide range of demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.473" |
| Outside Diameter | 5.085" |
| Cross Section | 0.222" |
Engineered for reliability and performance, this Silicone O-ring features precise dimensions: an Inside Diameter (ID) of 1.473 inches, an Outside Diameter (OD) of 5.085 inches, and a Cross Section of 0.222 inches. The Aluminum 6061 construction provides excellent corrosion resistance and structural integrity, making it suitable for applications where mechanical strength is paramount. Its inherent properties allow for consistent sealing across a broad temperature range and resistance to various chemicals, ensuring long-term operational efficiency in critical sealing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Visually inspect the O-ring and sealing groove for any debris or damage. 2. Apply a thin layer of compatible lubricant to the O-ring and the groove. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can lead to O-ring extrusion or damage. | Handle the O-ring with care and use appropriate tools if necessary. Ensure the sealing groove is clean and properly sized. |
| Incorrectly sizing the O-ring for the application, resulting in leaks or premature failure. | Verify that the O-ring's dimensions (ID, OD, Cross Section) precisely match the requirements of the sealing groove and assembly. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: High-pressure fluid systems, Chemical processing equipment, Automotive and aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||