This industrial-grade Silicone O-Ring, constructed from Aluminum 6061, offers superior sealing performance in extreme environments. Engineered for critical applications requiring resilience and chemical resistance.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.115" |
| Outside Diameter | 6.580" |
| Cross Section | 0.239" |
Built to exacting engineering tolerances, this Silicone O-Ring boasts an Inside Diameter of 4.115 inches, an Outside Diameter of 6.580 inches, and a precise Cross Section of 0.239 inches. The Aluminum 6061 material provides excellent corrosion resistance and moderate strength, making it suitable for applications involving moderate temperatures and pressures where a robust yet lightweight seal is paramount. Its inherent flexibility and wide operating temperature range make it ideal for dynamic and static sealing in aerospace, automotive, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove and O-ring are clean and free of debris. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to excessive compression and premature failure. | Apply only sufficient force to achieve a proper seal without deforming the O-ring beyond its elastic limit. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Consult material compatibility charts and use only approved lubricants and cleaning solutions for silicone. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Aerospace fluid and fuel systems, Automotive engine and transmission seals, Chemical processing equipment seals, Medical device sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||