This industrial O-ring, constructed from a robust Nylon-reinforced Silicone compound, provides exceptional sealing performance in demanding environments. Its precise dimensions ensure a secure fit for critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.290" |
| Outside Diameter | 6.284" |
| Cross Section | 0.256" |
A high-performance industrial component, this Silicone O-ring is engineered with a precise Inside Diameter of 3.290 inches, an Outside Diameter of 6.284 inches, and a substantial Cross Section of 0.256 inches. The Nylon reinforcement imparts enhanced tensile strength and resistance to abrasion and extrusion, while the Silicone base material offers excellent flexibility and resilience across a wide temperature range, typically from -60°C to +230°C. This combination makes it ideal for static and dynamic sealing in systems exposed to moderate pressures and a variety of chemicals, oils, and solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring fully within the groove, confirming it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring, leading to leakage or premature failure. | Always verify the groove dimensions and select an O-ring with the corresponding inside diameter, outside diameter, and cross-section. |
| Damaging the O-ring during installation with sharp tools or excessive stretching. | Use lubrication compatible with the O-ring material and install using hand pressure or appropriate installation tools, avoiding sharp edges. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive powertrain sealing, Industrial pump and valve seals, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||