This industrial-grade Silicone O-ring provides reliable sealing in challenging environments. Its robust design and material properties ensure long-lasting performance in a wide array of applications requiring high resilience and temperature stability.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.822" |
| Outside Diameter | 10.756" |
| Cross Section | 0.112" |
A proven choice for industrial professionals, this Silicone O-ring is engineered for precise sealing applications. With an inside diameter of 3.822 inches, an outside diameter of 10.756 inches, and a critical cross-section of 0.112 inches, it guarantees a tight, leak-proof seal. Silicone's inherent properties, including excellent flexibility, broad temperature range resistance (typically -60°C to +200°C, though specific grade may vary), and resistance to UV and ozone, make it ideal for food-grade applications, medical devices, and general industrial sealing where chemical inertness is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring into its designated groove, ensuring it sits flush. 3. Apply a thin, even layer of compatible lubricant if recommended for the application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can nick or cut the O-ring. | Apply a compatible lubricant and use gentle, even pressure to seat the O-ring in its groove. |
| Selecting an O-ring material not suitable for the fluid or temperature of the application. | Always verify the chemical and temperature compatibility of the Silicone O-ring with the specific operating environment. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, General Industrial Machinery and Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||