This industrial Silicone O-Ring, precisely machined from Aluminum 6061, offers superior sealing performance in demanding environments. Its robust construction ensures reliable operation under extreme conditions.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.484" |
| Outside Diameter | 4.190" |
| Cross Section | 0.078" |
Specified by design engineers worldwide, this Silicone O-Ring is engineered for critical sealing applications. Constructed from premium Aluminum 6061, it provides excellent corrosion resistance and mechanical strength. The precise dimensions of 6.484" inside diameter, 4.190" outside diameter, and a 0.078" cross-section ensure a tight, reliable seal in a variety of fluid power systems, chemical processing equipment, and high-temperature industrial machinery where material compatibility and long-term integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Gently compress the O-ring to verify proper seating and a uniform fit within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Install the O-ring without excessive force, allowing it to seat naturally in the groove. Use appropriate tools if necessary to avoid manual overextension. |
| Using a damaged or contaminated O-ring. | Inspect the O-ring for any nicks, cuts, or foreign material before installation. Replace if any defects are observed. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||