This industrial-grade Silicone O-ring provides reliable sealing in diverse environments. Its material properties ensure excellent performance under extreme temperatures and chemical exposure.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.729" |
| Outside Diameter | 6.779" |
| Cross Section | 0.131" |
Built to exacting engineering tolerances, this Silicone O-ring boasts an Inside Diameter of 3.729 inches, an Outside Diameter of 6.779 inches, and a precise Cross Section of 0.131 inches. Fabricated from high-quality polycarbonate silicone, it exhibits exceptional flexibility, a wide operating temperature range from -55°C to +200°C, and superior resistance to ozone, UV radiation, and many common industrial chemicals. This combination of precise dimensions and robust material characteristics makes it ideal for critical sealing applications where consistent performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp edges that could cause nicks or tears. 3. Gently seat the O-ring within the groove, ensuring it is fully contained and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Lubricate the O-ring and groove, and gently stretch the O-ring, avoiding sharp edges. |
| Installing a dry O-ring, causing friction and potential tearing. | Always use a compatible lubricant to ease installation and protect the O-ring. |
| Over-compressing the O-ring, leading to premature failure. | Ensure the O-ring fits snugly within the groove without being overly compressed. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature fluid containment, Chemical processing equipment seals, Automotive and aerospace sealing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||