This industrial-grade Silicone O-ring offers exceptional sealing performance and durability. Engineered from high-quality polycarbonate, it ensures reliable containment in a wide range of environments and applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.594" |
| Outside Diameter | 8.853" |
| Cross Section | 0.257" |
Precision-manufactured to tight tolerances, this Silicone O-ring boasts an Inside Diameter of 3.594 inches, an Outside Diameter of 8.853 inches, and a Cross Section of 0.257 inches. The polycarbonate material provides excellent resistance to a broad spectrum of chemicals and extreme temperatures, ranging from -60°C to +200°C. Its inherent flexibility allows for effective dynamic and static sealing, preventing leakage in high-pressure systems and in environments exposed to UV radiation and ozone. This makes it ideal for applications requiring a resilient and long-lasting sealing solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from burrs or debris. 2. Carefully lubricate the O-ring and groove with a compatible lubricant if specified for the application. 3. Install the O-ring, avoiding stretching or twisting, to ensure a proper seal within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently fit the O-ring into the groove without excessive tension to prevent premature wear and seal failure. |
| Using incompatible lubricants or cleaning agents. | Always consult a material compatibility chart to ensure lubricants and cleaning agents are suitable for polycarbonate and the specific media being sealed. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Automotive seals, Aerospace components, Medical equipment, Food processing machinery, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||