This industrial-grade Silicone O-Ring provides exceptional sealing performance in demanding environments. Its flexible yet durable composition ensures reliable operation across a wide temperature range and resistance to various chemicals.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.485" |
| Outside Diameter | 4.237" |
| Cross Section | 0.248" |
Manufactured under strict quality controls, this Silicone O-Ring features a precise Inside Diameter of 3.485 inches, an Outside Diameter of 4.237 inches, and a Cross Section of 0.248 inches. Silicone's inherent properties include excellent thermal stability, operating effectively from -50°C to +230°C (-58°F to +446°F), and superior resistance to ozone, UV, and weathering. Its low compression set ensures long-term sealing integrity, making it suitable for static and dynamic applications where resilience and a tight seal are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Carefully lubricate the O-ring and groove with a compatible lubricant, if recommended for the application. 3. Gently install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can damage the O-ring. | Apply gentle, even pressure and ensure the O-ring is seated correctly in the groove without distortion. |
| Installing the wrong size O-ring for the application's groove dimensions. | Always verify the O-ring's dimensions (ID, OD, CS) against the groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing in ovens and kilns, Low-temperature fluid sealing in refrigeration systems, Medical equipment and pharmaceutical processing seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||