Engineered for superior sealing, this robust Silicone O-Ring features a 304 Stainless Steel construction for exceptional chemical resistance and durability in harsh industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 0.858" |
| Outside Diameter | 7.804" |
| Cross Section | 0.152" |
Trusted by engineers across multiple sectors, this Silicone O-Ring boasts a precise Inside Diameter of 0.858" and an Outside Diameter of 7.804", with a 0.152" Cross Section. The 304 Stainless Steel housing provides excellent resistance to corrosion, extreme temperatures, and a wide range of chemicals, making it suitable for critical sealing applications in aerospace, chemical processing, and food & beverage industries. Its flexibility ensures a tight seal under pressure, preventing leaks and maintaining system integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or stretching beyond its elastic limit. 3. Position the O-ring within the designated groove, ensuring it is seated evenly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, causing permanent deformation. | Install with gentle, even pressure. Avoid unnecessary stretching or compression beyond the groove's requirements. |
| Using the wrong O-ring size for the application groove. | Always verify the O-ring dimensions (ID, OD, CS) against the groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Aerospace Fluid Systems, Food and Beverage Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||