This industrial-grade Silicone O-Ring provides superior sealing in demanding environments. Its robust construction ensures long-lasting performance across a wide temperature range, making it a critical component for reliable fluid and gas containment.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.187" |
| Outside Diameter | 7.970" |
| Cross Section | 0.183" |
Engineered for reliability and performance, this Silicone O-Ring boasts an Inside Diameter of 3.187 inches, an Outside Diameter of 7.970 inches, and a Cross Section of 0.183 inches. Silicone's inherent properties offer excellent resistance to extreme temperatures (-55°C to +230°C), weathering, ozone, and UV radiation, while maintaining flexibility. This makes it ideal for applications in food and beverage processing, medical equipment, automotive, and aerospace where purity and resilience are paramount. The material's low toxicity and non-stick surface further enhance its suitability for sensitive industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Position the O-ring squarely within the groove to achieve a uniform seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect O-ring size, leading to leaks or premature failure. | Always verify O-ring dimensions against the groove specifications before installation. |
| Stretching the O-ring excessively during installation, causing permanent deformation. | Apply gentle, even pressure and use appropriate tools to avoid overstretching. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: High-temperature sealing in ovens and furnaces, Medical device seals requiring biocompatibility, Food and beverage processing equipment gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||