Engineered for superior sealing, this Silicone O-Ring features precise dimensions for a reliable fit. Constructed from durable Carbon Steel, it offers exceptional resistance to wear and environmental factors in critical applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.148" |
| Outside Diameter | 9.002" |
| Cross Section | 0.214" |
Trusted by engineers across multiple sectors, this industrial Silicone O-Ring is manufactured to exacting tolerances, boasting an Inside Diameter of 3.148 inches, an Outside Diameter of 9.002 inches, and a Cross Section of 0.214 inches. The robust Carbon Steel material provides excellent tensile strength and corrosion resistance, ensuring long-term sealing integrity in high-pressure and high-temperature environments. Its chemical inertness makes it suitable for a wide range of fluid and gas applications where contamination must be prevented.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sealing groove and the O-ring for any damage or debris. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, causing the O-ring to be over-compressed and extruded. | Adhere to specified torque values and ensure proper assembly sequence to avoid excessive compression. |
| Using incompatible lubricants that can degrade the Silicone material. | Consult material compatibility charts and use only approved lubricants for Silicone O-rings. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-pressure fluid systems, Automotive sealing components, Aerospace fluid connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||