This industrial-grade silicone O-ring features a robust brass mounting, ensuring superior sealing performance and durability in challenging environments. Precisely engineered for critical applications requiring reliable containment.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.127" |
| Outside Diameter | 4.788" |
| Cross Section | 0.238" |
Manufactured under strict quality controls, this silicone O-ring boasts an Inside Diameter of 3.127 inches, an Outside Diameter of 4.788 inches, and a Cross Section of 0.238 inches. The silicone material provides excellent flexibility, resistance to extreme temperatures (-55°C to +200°C), and good sealing properties against various fluids. The integrated brass mounting enhances rigidity and facilitates secure installation in demanding mechanical assemblies where vibration or external forces are present.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring onto the designated groove or shaft, aligning the brass mounting with the corresponding feature. 3. Apply even, gentle pressure to seat the O-ring, ensuring a uniform fit without stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, which can deform the O-ring and compromise its sealing ability. | Apply only enough pressure to seat the O-ring firmly. Refer to equipment-specific torque specifications if available. |
| Using incompatible cleaning agents that can degrade the silicone material. | Clean mating surfaces and the O-ring with mild soap and water or manufacturer-recommended cleaning solutions only. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature fluid sealing in industrial machinery, Pressure vessel and pump sealing with brass components, Automotive and aerospace applications requiring robust seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||