This industrial-grade Silicone O-Ring offers exceptional sealing performance across a wide temperature range. Its durable material ensures reliable operation in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.963" |
| Outside Diameter | 3.132" |
| Cross Section | 0.085" |
Manufactured under strict quality controls, this Silicone O-Ring features an Inside Diameter of 3.963 inches and an Outside Diameter of 3.132 inches, with a precise Cross Section of 0.085 inches. Silicone rubber (though the material listed as 'Polycarbonate' is incorrect for this product type; assuming Silicone is the intended material for an O-ring) is chosen for its excellent flexibility, high-temperature resistance, and resistance to weathering and ozone, making it ideal for dynamic and static sealing applications. Its inherent chemical inertness also makes it suitable for contact with a variety of fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove. 3. Ensure the O-ring is properly seated and not twisted before assembling mating parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring for the application. | Always verify the required O-ring dimensions (ID, OD, and Cross Section) against the groove specifications before selection. |
| Twisting the O-ring during installation. | Gently roll the O-ring into the groove, avoiding any twisting motion which can compromise the seal. |
| Over-stretching the O-ring during installation. | Install the O-ring without excessive stretching. If significant stretching is required, consider a slightly larger diameter O-ring or a different material. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Industrial machinery fluid power systems, Food and beverage processing equipment, Pharmaceutical manufacturing seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||