This industrial O-ring features a durable silicone elastomer reinforced with 304 stainless steel for enhanced chemical resistance and structural integrity. Ideal for high-pressure and extreme temperature applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 8.512" |
| Outside Diameter | 0.520" |
| Cross Section | 0.113" |
Built to exacting engineering tolerances, this silicone O-ring boasts an Inside Diameter of 8.512 inches and an Outside Diameter of 0.520 inches, with a precise Cross Section of 0.113 inches. The 304 stainless steel reinforcement provides exceptional resistance to corrosion, a wide temperature range (-60°F to 450°F), and excellent mechanical strength, preventing extrusion under pressure and ensuring long-term sealing performance in aggressive chemical and thermal environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of burrs or sharp edges. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Ensure the O-ring is seated squarely within the groove and makes uniform contact with both sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sharp object to install the O-ring, leading to nicks or cuts. | Employ a rounded installation tool or lubricate the O-ring and groove to facilitate smooth insertion. |
| Overtightening fasteners, causing O-ring extrusion or permanent deformation. | Adhere to specified torque values during assembly to prevent over-compression. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, High-temperature fluid handling systems, Food and beverage machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||