This industrial-grade Silicone O-Ring, reinforced with a 304 Stainless Steel housing, provides exceptional sealing performance in extreme environments. Engineered for reliability and durability.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 4.643" |
| Outside Diameter | 4.063" |
| Cross Section | 0.111" |
Built to exacting engineering tolerances, this O-ring boasts an Inside Diameter of 4.643 inches, an Outside Diameter of 4.063 inches, and a precise Cross Section of 0.111 inches. The robust 304 Stainless Steel housing offers superior corrosion resistance and mechanical strength, making it ideal for applications involving high pressures, aggressive chemicals, and wide temperature fluctuations. Silicone's inherent flexibility and resilience ensure a tight, leak-proof seal across a broad spectrum of industrial uses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove, ensuring no twists or kinks. 3. Assemble mating components, applying even pressure to compress the O-ring and achieve a seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, crushing the O-ring. | Adhere to specified torque values for assembly to prevent over-compression. |
| Using incompatible lubricants that degrade silicone. | Consult compatibility charts and use only approved silicone-compatible lubricants. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Food and Beverage Machinery, High-Temperature Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||