Engineered for superior sealing in extreme environments, this Silicone O-Ring features a robust 304 Stainless Steel construction. Its precise dimensions ensure reliable performance under pressure and temperature fluctuations.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.029" |
| Outside Diameter | 2.319" |
| Cross Section | 0.197" |
Built to exacting engineering tolerances, this Silicone O-Ring boasts an Inside Diameter of 6.029", an Outside Diameter of 2.319", and a Cross Section of 0.197". The 304 Stainless Steel housing provides exceptional corrosion resistance and mechanical strength, making it ideal for applications involving aggressive chemicals, high temperatures, and rigorous operational demands. This design ensures a leak-proof seal in static and dynamic systems across various industrial sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both mating surfaces and the O-ring groove. 2. Carefully inspect the O-ring for any defects before installation. 3. Gently insert the O-ring into its designated groove, ensuring it is seated evenly without stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply only firm, even pressure to seat the O-ring. Lubrication with a compatible lubricant can aid installation. |
| Installing a damaged or improperly sized O-ring. | Always inspect the O-ring for nicks, cuts, or deformation before installation. Verify the O-ring dimensions match the groove specifications precisely. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, High-temperature fluid systems, Automotive and aerospace sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||