This industrial-grade Silicone O-Ring, precision manufactured from Aluminum 6061, ensures reliable sealing in demanding environments. Its robust construction offers excellent resistance to extreme temperatures and chemicals.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 3.018" |
| Outside Diameter | 6.972" |
| Cross Section | 0.155" |
Specified by design engineers worldwide, this Silicone O-Ring is engineered for superior sealing performance. With an Inside Diameter of 3.018 inches, an Outside Diameter of 6.972 inches, and a Cross Section of 0.155 inches, it provides a precise fit. The Aluminum 6061 compound offers excellent thermal stability, resilience, and resistance to a wide range of fluids and gases, making it suitable for high-pressure and high-temperature applications across various industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the smaller diameter of the mating component or into the groove, avoiding any sharp edges or tools that could nick or cut the material. 3. Gently seat the O-ring into the groove, ensuring it is uniformly compressed and not twisted or pinched during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring nicks or tears. | Apply gentle pressure and use appropriate tools (if necessary) that are designed to avoid damaging the O-ring. |
| Incorrect O-ring size selection for the groove, resulting in improper compression or leakage. | Verify the O-ring dimensions (ID, OD, CS) against the groove dimensions and design specifications before installation. |
| Installing on contaminated or damaged groove surfaces. | Thoroughly clean and inspect the groove for any burrs, sharp edges, or debris that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Aerospace fluid systems, Automotive engine seals, Industrial hydraulic and pneumatic systems, High-temperature chemical processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||