This industrial-grade Silicone O-Ring offers exceptional sealing integrity in demanding environments. Its robust construction and precise dimensions ensure reliable performance for critical applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.793" |
| Outside Diameter | 9.991" |
| Cross Section | 0.143" |
Engineered for reliability and performance, this Silicone O-Ring boasts a precise Inside Diameter of 2.793 inches, an Outside Diameter of 9.991 inches, and a Cross Section of 0.143 inches. Fabricated from high-purity silicone, it exhibits excellent resistance to extreme temperatures (-60°F to 450��F), ozone, UV radiation, and a wide range of chemicals. This material's inherent flexibility and low compression set make it ideal for static and dynamic sealing in food processing, medical equipment, automotive, and aerospace industries where purity and resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from burrs or damage. 2. Carefully place the O-ring into its designated groove, avoiding overstretching or twisting. 3. Apply light lubrication compatible with the O-ring material if required for assembly, then compress the O-ring evenly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching during installation | Install the O-ring without excessive tension. If it feels too tight, double-check the groove dimensions or consider a slightly larger O-ring. |
| Using incompatible lubricants | Always use lubricants specifically recommended for silicone O-rings to prevent material degradation and ensure a proper seal. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, Automotive and Aerospace Sealing Solutions, General Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||