This industrial-grade silicone O-ring features a robust nylon reinforcement, ensuring superior structural integrity and extended service life. Engineered for reliable sealing in demanding environments, it offers exceptional resilience and chemical resistance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.657" |
| Outside Diameter | 0.520" |
| Cross Section | 0.158" |
Precision-manufactured to tight tolerances, this silicone O-ring boasts an inside diameter of 2.657 inches, an outside diameter of 0.520 inches, and a cross-section of 0.158 inches. The inherent flexibility and wide temperature range of silicone (-60°C to 230°C) are enhanced by the integrated nylon reinforcement, which provides increased tensile strength, tear resistance, and dimensional stability. This combination makes it ideal for applications requiring resistance to moderate pressures and aggressive media, ensuring a secure and long-lasting seal where standard silicone may degrade or deform.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the smaller diameter or into its groove, avoiding excessive force or sharp tools. 3. Verify proper seating and compression to achieve a seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring beyond its elastic limit during installation. | Gently stretch the O-ring only as much as necessary to fit, and utilize appropriate lubrication if needed. |
| Using sharp or abrasive tools that can nick or cut the O-ring. | Employ non-metallic, rounded installation tools or hand-install the O-ring. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive fluid systems, Industrial machinery seals, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||